Panel Upgrade Cost in Pensacola, FL: 100, 200 & 400 Amp (2026 Estimates)

Short answer: Plan on roughly $850 to $1,800 for a 100 amp panel, $1,300 to $4,500 for a 200 amp upgrade and $2,000 to $12,000 for 400 amp service in Pensacola. These are our planning estimates built from 2026 national data (Angi, Fixr) and HomeGuide’s current guide, not local quotes. Meter base work, panel relocation and permits move the total.

Last updated Nov 2026

We’re a free referral service, not an electrical contractor. We don’t do electrical work or set prices. If you want a quote, the form below sends your request to an independent local electrician.

Panel upgrade cost by amperage

Job HomeGuide Angi (panel + install) Fixr Our planning estimate
100 amp panel (replacement or upgrade from 60A) $850 – $1,100 $800 – $1,500 $1,200 – $1,800 $850 – $1,800
200 amp (upgrade from 100A) $1,300 – $1,600 $1,300 – $2,000 $1,800 – $4,500 $1,300 – $4,500
400 amp service $2,000 – $4,000 $2,000 – $4,000 $8,000 – $12,000 $2,000 – $12,000 (wide; see below)

Source figures are national 2026 data. The “planning estimate” column is our own range covering the sources, not a quote. We found no published Pensacola-specific survey. For a same-amperage swap and other electrical jobs, see electrician costs in Pensacola.

Add-ons that change the total

Add-on Estimated cost Source
Electric meter box replacement $200 – $800 Angi
Subpanel (sometimes an alternative to a full upgrade) $400 – $1,750 Angi
Relocating the panel $1,000 – $4,000 extra HomeGuide; Fixr
Rewiring inside walls $1,500 – $12,000 Angi
Permit Varies by amperage and jurisdiction Pensacola permits guide

What drives the price

  • Panel swap vs. service upgrade. Replacing a panel at the same amperage is the cheapest job. Going up in amps often means a new meter base, larger service wires and a utility disconnect.
  • Why 400 amp estimates vary so much. Some 400 amp jobs are a straightforward meter and panel change. Others need two panels, new feeders and major rewiring, which explains Fixr’s much higher range.
  • Panel location. Moving the panel, or a panel in a finished wall, adds labor and patching.
  • Old wiring. Aluminum branch wiring, ungrounded circuits or a recalled panel brand can add work the inspector will require.
  • Storm damage. After a hurricane, a damaged mast or meter base must be fixed before power is restored, and demand for electricians spikes.
  • What you’re adding. EV chargers, heat pumps, pool equipment or a standby generator drive the amperage you need. See generator transfer switches.

Do you need 100, 200 or 400 amps?

  • 100 amps: may still work for a smaller home with gas appliances and no EV.
  • 200 amps: the common target for most single-family homes today, especially with electric HVAC, an EV charger or a generator.
  • 400 amps: large homes with several heavy loads, such as two EV chargers, a pool heater and multiple HVAC units.

An electrician should run a load calculation before recommending a size. Ask for it in writing.

Questions to ask before you hire

  1. Is this a panel swap or a full service upgrade with a new meter base?
  2. Is the permit fee included?
  3. Who coordinates the utility disconnect and reconnect?
  4. Will any circuits need new breakers (AFCI/GFCI) to pass inspection?
  5. What drywall or stucco repair is included?

Frequently asked questions

How much does a 200 amp panel upgrade cost in Pensacola?
Our planning estimate is about $1,300 to $4,500. HomeGuide puts a 100 to 200 amp upgrade at $1,300 to $1,600, Angi puts a 200 amp panel installed at $1,300 to $2,000, and Fixr reports $1,800 to $4,500 for 200 amp work that includes more wiring. Jobs that also need a new meter base, mast or service wires land at the high end. These are national estimates, not Pensacola quotes.
How much does a 100 amp panel replacement cost?
Angi lists a 100 amp panel installed at $800 to $1,500, and HomeGuide lists $850 to $1,100 for an upgrade to 100 amps from an older 60 amp service. Fixr reports $1,200 to $1,800. Most homes upgrading today go to 200 amps instead.
How much does a 400 amp service cost?
The sources disagree. HomeGuide and Angi list $2,000 to $4,000, while Fixr lists $8,000 to $12,000 for jobs with new placement and substantial wiring. 400 amp service usually needs a new meter setup and utility coordination, so treat any number as a rough estimate until an electrician sees the house.
Do I need a permit for a panel upgrade in Pensacola?
Yes, a panel or service change needs an electrical permit from the City of Pensacola, Escambia County or Santa Rosa County, depending on where you live. The City’s fee depends on amperage. See our Pensacola electrical permits guide for the fee table. The electrician normally pulls the permit.
Does the power company have to be involved?
For a service upgrade (more amps), usually yes. The utility disconnects and reconnects service and may need to approve the meter location. Ask the electrician to coordinate this and include it in the schedule.
Are you an electrician?
No. We’re a free referral service, not an electrical contractor, and we don’t do electrical work or set prices. The form sends your request to an independent local electrician who quotes you directly. Florida requires electricians to be licensed, so verify any electrician’s license at myfloridalicense.com before hiring.
How much does a panel upgrade cost in Pensacola for 100, 200 or 400 amps?
As planning estimates: about $850 to $1,800 for a 100 amp panel, $1,300 to $4,500 for a 200 amp upgrade and $2,000 to $12,000 for 400 amp service, plus the permit. These are built from 2026 national data, not Pensacola quotes.

Sources

Sources checked October 27, 2026. All prices on this page are estimates for planning, not quotes. Independent local pros set their own prices.

Get a free quote

Tell us what’s going on. A local, independent electrician can reach out, usually the same business day. Florida requires electricians to be licensed, so please verify any electrician’s license at myfloridalicense.com before hiring. There’s no cost to request a quote.

    A free referral service for Pensacola, Gulf Breeze, Pace, Milton & Navarre. We pass your request to an independent local pro. Not a contractor.

    Get a free quote

    Services

    Areas

    Helpful links

    Referral service disclosure: Electrician Pensacola FL is a free referral service, not an electrician or contractor. We do not perform electrical work. When you submit a request, we pass it to an independent local provider. Providers set their own prices and are responsible for their work. We don't verify licenses or insurance. Florida requires electricians to be licensed, so please check any provider's license and insurance before hiring. Cost figures on this site are typical ranges for planning only, not quotes.